Speaker Installation
-
Do I need an amp or receiver for Jensen speakers?
Yes, as Jensen speakers are passive, allowing for easy upgradability - you will need a receiver such as a Denon for home theatre or a WiiM amp for 2 speaker stereo. You can explore what you need in a receiver below: https://www.jensenspeakers.com.au/blogs/news/av-receiver-for-a-home-theatre We'... -
Do speakers need back boxes or enclosures?
We actually recommend against building a box as they are tuned for large enclosures provided by your ceiling/wall cavities. Over 99% of our speakers are installed box free and they work great like this. If you have issues with in-ceiling speakers, you can later install something like a dynabox:... -
Installing Your New Jensen Speakers
So you just purchased your first in-wall and in-ceiling speakers from Jensen. Now that you have made the smart decision to do so, the installation is yet to come. In this article, I am going to give you some tips and hints at a successful installation. We will go over the planning, the prep, and ... -
PDF for Speaker Installation
-
Leave around 10mm from edge of speaker and ~20mm from cut out hole.
-
What Kind of Warranty comes with Jensen Speakers
The JENSEN warranty is the industry best. To validate your Warranty, you must register your Warranty Online. Apart from long Warranties, we carry up to 15 Years of Spare Parts on most speakers. Some parts may be refurbished. In rare cases where speaker is unrepairable or there are no parts we ... -
What type of Speaker Lead should I use?
For obvious reasons, all JENSEN Speakers DO NOT come with Speaker Leads. For best results we recommend the 14 Gaugewire for runs under 10 meters or 12 Gauge for 10+ meters.